{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 25mm
Article no.: 164180 25
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 25 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 24.060 mm - 25.000 mm | |
| Flute length Lc | 68 mm | |
| Overhang L1 | 167 mm | |
| Overall length L | 268 mm | |
| Number of cutting edges Z | 8 | |
| Morse taper MT size | 3 | |
| Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X | |
| Configurable qualities | 5; 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 25 | |
| EAN / GTIN | 4045197092571 | |
| Manufacturer number | 164180 25 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 25mm
on request
Available in 1-2 weeks
0 pieces in stock
BGN 407.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
88 pieces in stock
BGN 254.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 632.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 593.78
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
BGN 253.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
113 pieces in stock
BGN 268.79
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 | 8 | 8 | 8 | 8 |
| Overhang L1 | 167 mm | 174 mm | 125 mm | 125 mm | 145 mm | 140 mm |
| Nominal ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Standard | DIN 208 B | DIN 208 B | Manufacturer’s standard | Manufacturer’s standard | DIN 206 B | DIN 206 B |
| Flute length Lc | 68 mm | 68 mm | 25 mm | 25 mm | 115 mm | 115 mm |
| Tool material | HSS E | HSS E | HSS | HSS | HSS | HSS |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |