{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Dreh-Wendeschneidplatte CC.T 120404, für Schlichtbearbeitung, Sorte HB7020
Article no.: 260064 HB7020
Article code:
Product details
Technical Data
| ISO-Code Wendeschneidplatte | CCMT 120404 | |
| Eckenradius | 0,4 mm | |
| Sorte | HB7020 | |
| Schneidstoff | HM | |
| Hauptanwendung | P | |
| Schnittbedingung | leicht unterbrochen | |
| Spanbrecher | SS | |
| Toleranz | M | |
| Schnitttiefe ap | 0,2 mm - 2,5 mm | |
| Vorschub f | 0,05 mm/U - 2,5 mm/U | |
| Schnittgeschwindigkeit vc Hauptanwendung | 150 m/min - 400 m/min | |
| Anzahl Wechsel/Schneiden | 2 | |
| Schlicht/Schrupp-Zuordnung | Schlichten | |
| Produktart | Wendeschneidplatte zum Drehen |
Identification numbers & Classifications
| Article number | 260064 HB7020 | |
| EAN / GTIN | 4045197710819 | |
| Manufacturer number | 260064 HB7020 |
Application Table
P
P
P
P
P
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
GARANT Dreh-Wendeschneidplatte CC.T 120404, für Schlichtbearbeitung, Sorte HB7020
on request
In stock
554 pieces in stock
from
1
Pieces
CHF 13.55
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
CHF 11.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
640 pieces in stock
from
1
Pieces
US $ 15.17
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
US $ 12.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
790 pieces in stock
US $ 9.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
188 pieces in stock
US $ 9.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
584 pieces in stock
from
1
Pieces
US $ 15.17
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
US $ 12.65
plus VAT at the current rate
Prices plus delivery costs
|
|
| Schneidstoff | HM | Carbide | Carbide | Carbide | Carbide |
| Schnittbedingung | leicht unterbrochen | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
| Schnitttiefe ap | 0,2 mm - 2,5 mm | 0.2 mm - 2.5 mm | 0.4 mm - 2 mm | 0.1 mm - 1 mm | 0.2 mm - 2.5 mm |
| Sorte | HB7020 | HB7140-1 | HBT020 | HBT130 | HB7130-2 |
| Spanbrecher | SS | VS | PF | M | VS |
| Vorschub f | 0,05 mm/U - 2,5 mm/U | 0.1 mm/rev. - 0.3 mm/rev. | 0.1 mm/rev. - 0.3 mm/rev. | 0.05 mm/rev. - 0.2 mm/rev. | 0.1 mm/rev. - 0.3 mm/rev. |
| Schnittgeschwindigkeit vc Hauptanwendung | 150 m/min - 400 m/min | 70 m/min - 260 m/min | 120 m/min - 330 m/min | 60 m/min - 220 m/min | 80 m/min - 270 m/min |