{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cermet reaming head HPC H7 steel Blind hole, uncoated, Nominal ⌀ D: 32mm
Article no.: 239715 32
Article code:
- Tool material: Cermet
- Standard: Manufacturer’s standard
- Hole tolerance: H7
- Application for type of drilling: for blind holes
- Machining strategy: HPC
Product details
Technical Data
| Series | TopCut | |
| Nominal ⌀ D | 32 mm | |
| Coating | uncoated | |
| Tool material | Cermet | |
| Standard | Manufacturer’s standard | |
| Hole tolerance | H7 | |
| Application for type of drilling | for blind holes | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| Semi-Standard | yes | |
| Arbor size | 24 mm | |
| Cutter length l1 | 12 mm | |
| Head length l | 30 mm | |
| Number of cutting edges Z | 8 | |
| suitable arbor | GARANT TopCut | |
| Width across flats | 21 mm | |
| Feed f in steel < 1100 N/mm2 | 0.8 mm/rev. | |
| Type of product | Cutter insert for reaming |
Identification numbers & Classifications
| Article number | 239715 32 | |
| EAN / GTIN | 4062406115654 | |
| Manufacturer number | 239715 32 |
Application Table
P
140
P
140
P
140
P
120
K
160
K
140
Description
Version:
Interchangeable head reamer system finish ground for fit IT7. Cutter geometry matched to the application.
System concentricity ≤ 5 µm (depending on the head and holder) when mounted.
With short, straight flutes.
System concentricity ≤ 5 µm (depending on the head and holder) when mounted.
With short, straight flutes.
Application:
For blind holes.
For HPC/HSC reaming.
For HPC/HSC reaming.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Cermet reaming head HPC H7 steel Blind hole, uncoated, Nominal ⌀ D: 32mm
on request
In stock
19 pieces in stock
US $ 482.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
US $ 482.04
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 |
| Coating | uncoated | uncoated |
| Through-coolant | yes | yes |
| Head length l | 30 mm | 30 mm |
| Nominal ⌀ D | 32 mm | 32 mm |
| Cutter length l1 | 12 mm | 12 mm |
| Type of product | Cutter insert for reaming | Cutter insert for reaming |