{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Softcut® | |
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 3 | |
Shank type | with threaded shank | |
Setting angle κ | 90 degrees | |
Milling application | End milling | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum cutting depth ap max | 6 mm | |
Overall length Ltot | 35 mm | |
⌀ D1 h6 | 12.5 mm | |
⌀ D2 | 20.7 mm | |
Mounting thread M | M12 | |
suitable indexable insert | SO.. 0836.. | |
Pack of insert screws | 219863 (8IP; 2.2 Nm) | |
Type of product | End / face mill |
Article number | 214904 25/3 | |
EAN / GTIN | 4045197750679 | |
Manufacturer number | 214904 25/3 |
This article |
Recommendations |
|||
---|---|---|---|---|
GARANT Softcut HSI, with threaded shank, ⌀ D / number of teeth Z: 25/3mm
on request
In stock
Available in 3-4 working days
21 pieces in stock
21 pieces available in 3-4 working days
US $ 252.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
Available in 3-4 working days
40 pieces in stock
40 pieces available in 3-4 working days
US $ 328.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
Available in 3-4 working days
27 pieces in stock
27 pieces available in 3-4 working days
US $ 312.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
Available in 3-4 working days
13 pieces in stock
13 pieces available in 3-4 working days
US $ 383.01
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 | 3 | 3 |
Milling application | End milling | Circular milling; Circular milling; Ramping | End milling; Circular milling; Ramping | Corner milling |
Overall length Ltot | 35 mm | 35 mm | 35 mm | 30 mm |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | SO.. 0836.. | AP.. 1335.. | AP.. 1003 | LO.U0904.. |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm |