{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Copy mill 7° positive, with bore, ⌀ D / number of teeth Z: 80/7mm
Article no.: 212150 80/7
Article code:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 68 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Setting angle κ | 15 – 27 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212150 80/7 | |
| EAN / GTIN | 4045197750440 | |
| Manufacturer number | 212150 80/7 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
Vibration reduction and soft cutter edge entry due to 7° positive setting of the indexable inserts.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Vibration reduction and soft cutter edge entry due to 7° positive setting of the indexable inserts.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.