{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Titan solid carbide end torus cutter HPC, TiAlN, ⌀ h9 DC: 2mm
Article no.: 206286 2
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h9
- No. of teeth Z: 2
Product details
Technical Data
| Series | Master Titan | |
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h9 | |
| No. of teeth Z | 2 | |
| Helix angle | 15 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Dimension ap max transverse | 0.15 mm | |
| Programming radius | 0.3 mm | |
| Flute length Lc | 1.5 mm | |
| Overhang length L1 incl. recess | 13 mm | |
| Recess ⌀ D1 | 1.7 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Setting angle κ | 11 degrees | |
| Feed f in titanium > 850 N/mm2 | 0.018 mm | |
| Colour ring | pink | |
| Type of product | End torus mill |
Identification & Classification
| Article number |
206286 2
Copy |
|
| EAN / GTIN |
4045197991317
Copy |
|
| Manufacturer number |
206286 2
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
S
ISO code:
90
suitable for / [m/min]
Description
Version:
Tolerance: Corner radius R1 = ±0.01 mm.
Special centre cutting edge geometry for traverse milling at very high feed rates.
Special centre cutting edge geometry for traverse milling at very high feed rates.
Application:
For copy and traverse milling of titanium under HPC conditions.
Using special milling strategies very high rates of metal removal can be achieved.
Using special milling strategies very high rates of metal removal can be achieved.
Note:
Regrinding not recommended.