{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter HPC 6 mm
Article no.: 203212 6
Article code:
- Tool material: Solid carbide
- Norm: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.02
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.02 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 13 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 70 HRC | 0.02 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203212 6 | |
| EAN / GTIN | 4045197640796 | |
| Manufacturer number | 203212 6 |
Application Table
H
145
H
100
H
80
H
75
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
- Size nominal ⌀: DC ≤ size 12: 0 / −0.02 mm;
- Size nominal ⌀: DC from size 16: 0 / -0.03 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.
For profile milling as finishing.
(Plunge cutting only to shallow depths.)
For profile milling as finishing.
(Plunge cutting only to shallow depths.)
Note:
For materials > 65 HRC: ae = 0.02×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide milling cutter HPC 6 mm
on request
In stock
109 pieces in stock
US $ 132.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
184 pieces in stock
US $ 74.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
102 pieces in stock
US $ 42.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
188 pieces in stock
US $ 88.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
120 pieces in stock
US $ 39.31
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | red | red | red | red | red |
| Through-coolant | no | no | no | no | no |
| Norm | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Cutting edge ⌀ DC | 6 | 6 | 6 | 6 | 6 |
| Helix angle | 45 | 50 | 50 | 50 | 45 |
| Tolerance nominal ⌀ | 0 / -0.02 | e8 | h10 | e8 | 0 / -0.02 |