{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 18 mm
Article no.: 192860 18
Article code:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: ±0.12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 18 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | ±0.12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.041 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192860 18 | |
| EAN / GTIN | 4045197108562 | |
| Manufacturer number | 192860 18 |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill HSS-PM 18 mm
on request
In stock
32 pieces in stock
US $ 134.43
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
US $ 101.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
US $ 150.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
US $ 119.22
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
US $ 134.95
plus VAT at the current rate
Prices plus delivery costs
|
|
| Standard | DIN 844 | DIN 844 B | DIN 844 B | DIN 844 | DIN 844 B |
| Flute length Lc | 32 | 32 | 63 | 32 | 32 |
| Helix angle | 30 | 25 | 36 | 30 | 50 |
| Tolerance nominal ⌀ | ±0.12 | js12 | js14 | k12 | k10 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.3 | 0.6 | 0.7 | 0.3 | 0.3 |
| Shank ⌀ Ds | 16 | 16 | 16 | 16 | 16 |