{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 25M mm
Article no.: 192860 25M
Article code:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: ±0.12
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | ±0.12 | |
| No. of teeth Z | 6 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 68 mm | |
| Overhang length L1 incl. recess | 87 mm | |
| Recess ⌀ D1 | 24.5 mm | |
| Overall length L | 144 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.054 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192860 25M | |
| EAN / GTIN | 4045197108623 | |
| Manufacturer number | 192860 25M |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Roughing end mill HSS-PM 25M mm
on request
In stock
18 pieces in stock
US $ 265.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
US $ 195.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
US $ 149.65
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 90 | 45 |
| Overall length L | 144 | 144 | 144 |
| Through-coolant | no | no | no |
| Tool material | HSS PM | HSS PM | HSS Co 8 |
| Helix angle | 30 | 30-40 | 30 |
| Tolerance nominal ⌀ | ±0.12 | k10 | k12 |
| Shank ⌀ Ds | 25 | 25 | 25 |