{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill 9 mm
Article no.: 192840 9
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: ±0.12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 9 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | ±0.12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 19 mm | |
| Overall length L | 69 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.014 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192840 9 | |
| EAN / GTIN | 4045197108050 | |
| Manufacturer number | 192840 9 |
Application Table
N
120
P
78
P
55
P
55
P
29
P
25
M
17
M
14
K
46
N
92
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Centre cutting teeth for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill 9 mm
on request
In stock
89 pieces in stock
US $ 60.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
57 pieces in stock
US $ 44.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
98 pieces in stock
US $ 42.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
US $ 50.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
US $ 31.19
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 |
| Colour ring | green | without | without | without | without |
| Milling profile | HR | NF | NR | NR | NR |
| No. of teeth Z | 4 | 3 | 3 | 3 | 4 |
| Corner chamfer width at 45° | 0.3 | 0.3 | 0.4 | 0.4 | 0.5 |
| Shank ⌀ Ds | 10 | 10 | 10 | 10 | 10 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |