{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill 25 mm
Article no.: 192840 25
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: ±0.12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | ±0.12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.054 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192840 25 | |
| EAN / GTIN | 4045197108159 | |
| Manufacturer number | 192840 25 |
Application Table
N
120
P
78
P
55
P
55
P
29
P
25
M
17
M
14
K
46
N
92
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Centre cutting teeth for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill 25 mm
on request
In stock
139 pieces in stock
US $ 180.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
US $ 133.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
US $ 122.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
US $ 152.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
86 pieces in stock
US $ 181.16
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | green | without | without | without | yellow |
| Milling profile | HR | NF | NR | NR | WR |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Tolerance nominal ⌀ | ±0.12 | k10 | js12 | js12 | js14 |
| No. of teeth Z | 5 | 3 | 3 | 3 | 3 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 25 | 25 | 25 | 25 | 25 |