{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Bridge reamer 31 mm
Article no.: 162800 31
Article code:
Click to enlarge image
Click to enlarge image
For reaming undersized or offset holes.
Click to enlarge image
- Tool material: HSS
- Standard: DIN 311
- Helix angle: 25
- Tolerance nominal ⌀: k11
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 31 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 311 | |
| Helix angle | 25 degrees | |
| Tolerance nominal ⌀ | k11 | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through holes | |
| Minor ⌀ | 22.6 mm | |
| Flute length Lc | 210 mm | |
| Overhang L1 | 227 mm | |
| Overall length L | 326 mm | |
| Number of cutting edges Z | 5 | |
| Morse taper MT size | 3 | |
| Feed f in steel < 500 N/mm2 | 0.3 mm/rev. | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162800 31 | |
| EAN / GTIN | 4062406065126 | |
| Manufacturer number | 162800 31 |
Application Table
N
20
N
20
P
15
P
10
P
7
Description
Version:
Tapering flute form with a length of approx. 3×nominal ⌀. Very sturdy due to strong core and radius heel of flutes. Easy, peeling cut by spiral flutes; number of flutes varies according to the size.
Application:
Particularly useful for the installation of components; for reaming offset holes or enlarging rivet holes. Bridge reamers are used on pneumatic hand-held drills in boiler construction.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Bridge reamer 31 mm
on request
Available in 6-8 weeks
0 pieces in stock
US $ 378.58
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
US $ 333.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
US $ 477.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
US $ 456.43
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 10 | 8 | 8 |
| Coating | uncoated | uncoated | TiAlN | TiAlN |
| Colour ring | without | without | green | green |
| Through-coolant | no | no | yes, with 25 bar | yes, with 25 bar |
| Shank | Morse taper | Morse taper | DIN 6535 HA with h6 | DIN 6535 HA with h6 |
| Flute length Lc | 210 | 75 | 25 | 25 |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit |