{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Specialni pritezni čep, brez notranjega navoja zatesnjen 40
Št. art.: 308700 40
Koda izdelka:
Podrobnosti o izdelku
Tehnični podatki
| za strmi konus | 40 | |
| Značilnosti izvrtine | brez izvrtine | |
| ⌀ zveze D | 25,1 mm | |
| ⌀ glave D1 | 21,1 mm | |
| Celotna dolžina L | 53 mm | |
| L1 | 25,1 mm | |
| Navoj M | M16 | |
| Maksimalni zatezni moment | 50 Nm | |
| za strmi konus z barvno kodo | SK 40 | |
| Zev ključa | 22 mm | |
| Vrsta izdelka | Pritezni čep |
Identifikacijske številke in klasifikacije
| Številka izdelka | 308700 40 | |
| EAN/GTIN | 4045197151025 | |
| Številka proizvajalca | 308700 40 |
Opis
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also DIN 69871 / ISO 7388-1.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
No suitable chuck key available.