{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Sveder z obračalnimi ploščicami za vrtanje v polno KOMET KUB Quatron® kombinirano držalo 15 mm
Št. art.: 235502 15
Koda izdelka:
- Drill depth for indexable insert drill up to: 3×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Podrobnosti o izdelku
Tehnični podatki
| Series | KUB Quatron® | |
| Nominal ⌀ D | 15 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 45 mm | |
| for inch ⌀ | 19/32 in | |
| Overhang LA | 69 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| ISO code indexable insert | SOEX 050204 13-.. | |
| Pack of insert screws | 239652 6IP1 (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 119 mm | |
| Type of product | Indexable drill |
Identifikacijske številke in klasifikacije
| Številka izdelka | 235502 15 | |
| EAN/GTIN | 4047109090729 | |
| Številka proizvajalca | U11 61502 |
Opis
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.