{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Cutting edge ⌀ DC | 32 mm | |
Number of cutting edges Z | 3 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 15.7 mm | |
Overhang L1 | 40 mm | |
Overall length Ltot | 130 mm | |
Shank ⌀ Ds h6 | 32 mm | |
⌀ D3 | 25 mm | |
Circular interpolation milling ⌀ Dmin | 57 mm | |
Circular interpolation milling ⌀ Dmax | 62 mm | |
Ramping angle αmax | 0.61 degrees | |
Ramping length L for αmax | 23.6 mm | |
suitable indexable insert | BDMT 170408 | |
Insert screw | 229709 (T15; 3.5 Nm) | |
Type of product | End / face mill |
Številka izdelka | 227500 32/3 | |
EAN/GTIN | 4960664396191 | |
Številka proizvajalca | THN03256 |
Tega članka |
Priporočilo: |
||
---|---|---|---|
![]() ![]() Indexable milling cutter 90° MEC17 32/3 mm
po ponudbi
Na zalogi
2 kosov na zalogi
£292.20
plus DDV po trenutni stopnji
in strošek dostave
|
po ponudbi
Na zalogi
21 kosov na zalogi
£318.23
plus DDV po trenutni stopnji
in strošek dostave
|
po ponudbi
Na zalogi
20 kosov na zalogi
£312.34
plus DDV po trenutni stopnji
in strošek dostave
|
|
Number of cutting edges Z | 3 | 3 | 3 |
Milling application | Circular milling; Ramping; End milling | End milling; Circular milling; Ramping | Corner milling |
Through-coolant | yes | yes | yes |
suitable indexable insert | BDMT 170408 | AP.. 1335.. | LO.U0904.. |
Shank type | Plain shank | Plain shank | Plain shank |
Cutting edge ⌀ DC | 32 mm | 32 mm | 32 mm |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees |