{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped hammer drill “5” SDS-plus 22X450 mm
Article no.: 789005 22X450
Article code:
- Tool material: Carbide
- Use with impact / without impact: Impact drilling
- Shank: SDS Plus
Product details
Technical Data
| ⌀ | 22 mm | |
| overall length | 450 mm | |
| Flute length | 400 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | Impact drilling | |
| Shank | SDS Plus | |
| Number of cutting edges Z | 2 | |
| Type of product | Masonry drill |
Identification numbers & Classifications
| Article number | 789005 22X450 | |
| EAN / GTIN | 3165140028097 | |
| Manufacturer number | 1618596233 |
Description
Version:
Active centring tip for active drilling in concrete. The high quality carbide tip with particularly strong brazed joint guarantees long tool life, even in reinforced concrete.
Application:
For drilling concrete, natural stone, and masonry.
Note:
When using extra long drills (> 500 mm), first drill a pilot hole with a shorter drill of the same diameter (prevents bending and breakage).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Carbide-tipped hammer drill “5” SDS-plus 22X450 mm |
||
| ⌀ | 22 | 22 |
| overall length | 450 | 450 |
| Shank | SDS Plus | SDS Plus |
| Tool material | Carbide | Carbide |
| Flute length | 400 | 400 |
| Use with impact / without impact | Impact drilling | Impact drilling |
| Type of product | Masonry drill | Masonry drill |