{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Fixed solid carbide lathe centre 60° with push-off thread, very large ⌀ / Morse taper: 80/4
Article no.: 323210 80/4
Article code:
Product details
Technical Data
| Morse taper | 4 | |
| Head length L | 72.5 mm | |
| External ⌀ D | 80 mm | |
| ⌀ d | 65 mm | |
| maximum radial run-out | 0.001 mm | |
| Thread M | M36×1.5 | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 323210 80/4 | |
| EAN / GTIN | 4045197882677 | |
| Manufacturer number | 323210 80/4 |
Description
Version:
- High-precision solid carbide tip. Close-fitting carbide design for optimum stability and freedom from breakage, no additional safety equipment required.
- Tip angle 60°.
- High surface quality on the shank for optimum fit.
- Complete tool hardened and ground.
- With carbide tips for applications with high wear.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For grinding high-precision components.
Optional extras:
Draw-off nut No. 323230.
Note:
Order the draw-off nut separately. Geometric dimensions to DIN 806 E.