{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | WNMG 080412 | |
Corner radius | 1.2 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS (brass) | |
Tolerance | M | |
Cutting depth ap | 0.8 mm - 4 mm | |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 6 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 252116 CA6525 | |
EAN / GTIN | 4960664472345 | |
Manufacturer number | TJV08633 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
WNMG 080412, Grade: CA6525 |
on request
In stock
574 pieces in stock
from
1
Pieces
€ 12,66
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 10,55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,884 pieces in stock
from
1
Pieces
€ 12,42
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 10,35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
558 pieces in stock
€ 7,90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,372 pieces in stock
€ 7,90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,771 pieces in stock
|
|||
ISO code indexable insert | WNMG 080412 | WNMG 080404 | WNMG 080404 | WNMG 080408 | WNMG 080408 | WNMG 080404 | WNMG 080408 | WNMG 080408 |
Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Voor-/nabewerken | Voor-/nabewerken | Voor-/nabewerken | Voor-/nabewerken | Voor-/nabewerken | Nabewerken |
Cutting conditions | slightly interrupted | continuous | licht onderbroken | continu | licht onderbroken | licht onderbroken | licht onderbroken | licht onderbroken |
Grade | CA6525 | HB7120-1 | HB7140-1 | HB7120-1 | HB7140-1 | HBT130 | HBT130 | HB7130-2 |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | 0.1 mm/rev. - 0.5 mm/rev. | 0,1 mm/omw. - 0,5 mm/omw. | 0,1 mm/omw. - 0,5 mm/omw. | 0,1 mm/omw. - 0,5 mm/omw. | 0,12 mm/omw. - 0,45 mm/omw. | 0,12 mm/omw. - 0,45 mm/omw. | 0,1 mm/omw. - 0,5 mm/omw. |
Cutting speed vc main application | 60 m/min - 220 m/min | 80 m/min - 260 m/min | 60 m/min - 230 m/min | 80 m/min - 260 m/min | 60 m/min - 230 m/min | 50 m/min - 200 m/min | 50 m/min - 200 m/min | 70 m/min - 240 m/min |
Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Wisselplaat voor het draaien | Wisselplaat voor het draaien | Wisselplaat voor het draaien | Wisselplaat voor het draaien | Wisselplaat voor het draaien |