{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNMG 110404, Grade: HB7130-2
Article no.: 250652 HB7130-2
Article code:
Product details
Technical Data
| ISO code indexable insert | DNMG 110404 | |
| Corner radius | 0.4 mm | |
| Grade | HB7130-2 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | VS | |
| Cutting depth ap | 0.3 mm - 2 mm | |
| Feed f | 0.1 mm/rev. - 0.4 mm/rev. | |
| Cutting speed vc main application | 80 m/min - 270 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250652 HB7130-2 | |
| EAN / GTIN | 4062406749934 | |
| Manufacturer number | 250652 HB7130-2 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
DNMG 110404, Grade: HB7130-2 |
|||||||||
| Number of changes/inserts | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Corner radius | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm |
| Cutting conditions | slightly interrupted | slightly interrupted | continuous | continuous | slightly interrupted | heavily interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
| Cutting depth ap | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.5 mm - 2 mm | 0.5 mm - 2 mm |
| Grade | HB7130-2 | HB7020 | HB7010-1 | HB7120-1 | HB7140-1 | HB7035-1 | HB7020 | HBT130 | HBT020 |
| Feed f | 0.1 mm/rev. - 0.4 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0.15 mm/rev. - 0.35 mm/rev. | 0.15 mm/rev. - 0.45 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. |
| Main application | M | P | P | M | M | P | P | M | P |