{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Drill depth for indexable insert drill up to | 4×D | |
Shank | ISO 9766 | |
Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
Through-coolant | yes | |
Machining strategy | HPC | |
Type of product | Indexable drill |
Article number | 236601 15 | |
EAN / GTIN | 4047109223141 | |
Manufacturer number | U44 01500 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
KUB Pentron® indexable drill Plain shank, 4×D, ⌀ DC m7: 15mm |
|||||
Number of cutting edges Z | 1 | 1 | 2 | ||
Through-coolant | yes | yes | yes | yes | yes |
Nominal ⌀ D | 15 | 15 | 15 | ||
Shank | ISO 9766 | DIN 6535 HE, DIN 6595 | ISO 9766 | ISO 9766 | ABS |
Pack of insert screws | 239700 5IP (0.38 Nm) | 232980 1 (TX6;0.4Nm) | 239700 5IP (0.38 Nm) | ||
Type of product | Indexable drill | Indexable drill | Indexable drill | Indexable drill | Indexable drill |
Overhang LA | 74 mm | 79 mm | 103 mm |