{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable drill combination shank 40 mm
Article no.: 232300 40
Article code:
- Drill depth for indexable insert drill up to: 3×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Nominal ⌀ D | 40 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Reach L1 | 120 mm | |
| Overhang LA | 159 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 1.5 mm | |
| ISO code indexable insert | WOEX 06T304 | |
| Pack of insert screws | 239700 10IP (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 219 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 232300 40 | |
| EAN / GTIN | 4045197346209 | |
| Manufacturer number | 232300 40 |
Description
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Indexable inserts WOEX 06T304.
Bemærk:
VIGTIGT!
Når boret kommer igennem, falder der en skive af.
Fare for ulykker ved roterende emner.
Sørg for de nødvendige sikkerhedsforanstaltninger.
Trinværktøjer op til 2 trin kan leveres på forespørgsel i henhold til dine ønsker. (Mindste ordremængde: 2 stk.).
Forespørgselsformularen kan findes i e-butikken på produktsiden under „Formularer”.
Når boret kommer igennem, falder der en skive af.
Fare for ulykker ved roterende emner.
Sørg for de nødvendige sikkerhedsforanstaltninger.
Trinværktøjer op til 2 trin kan leveres på forespørgsel i henhold til dine ønsker. (Mindste ordremængde: 2 stk.).
Forespørgselsformularen kan findes i e-butikken på produktsiden under „Formularer”.