{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
90° indexable milling cutter MECH11 25/2 mm
Article no.: 227453 25/2
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Through-coolant | yes | |
| ISO code indexable insert | BDMT 11T308 | |
| Number of effective inserts Zeff | 2 | |
| Number of indexable inserts | 8 | |
| maximum cutting depth ap max | 37 mm | |
| Overhang L1 | 46 mm | |
| Overall length Ltot | 104 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| suitable indexable insert | BDMT 11T308 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227453 25/2 | |
| EAN / GTIN | 4960664526314 | |
| Manufacturer number | THN03900 |
Description
Version:
Notched indexable inserts reduce the cutting forces and vibration. Comparatively larger cutting widths ae can be achieved with the same cutting depth ap. High productivity even on machines with low spindle power.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
90° indexable milling cutter MECH11 25/2 mm |
||
| Overall length Ltot | 104 | 112 |
| Through-coolant | yes | yes |
| suitable indexable insert | BDMT 11T308 | LO.U0904.. |
| Shank type | Weldon shank | Weldon shank |
| Cutting edge ⌀ DC | 25 | 25 |
| Setting angle κ | 90 | 90 |
| Type of product | End / face mill | End / face mill |