{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEV 20/3 mm
Article no.: 226410 20/3
Article code:
- Setting angle κ: 90
- Milling application: Plunging; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 6 mm | |
| Overall length Ltot | 30 mm | |
| Mounting thread M | M10 | |
| ⌀ D3 | 15 mm | |
| Circular interpolation milling ⌀ Dmin | 35 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Ramping angle αmax | 0.8 degrees | |
| Ramping length L for αmax | 14.25 mm | |
| suitable indexable insert | TOMT060508 | |
| Insert screw | 229723 1 (10IP; 2.0 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226410 20/3 | |
| EAN / GTIN | 4960664914234 | |
| Manufacturer number | THN08497 |
Description
Version:
High-performance milling cutter with newly developed triangular indexable insert for corner and slot milling and ramping with lower cutting forces and increased stability.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Indexable milling cutter 90° MEV 20/3 mm |
|||||
| Number of cutting edges Z | 3 | 3 | 3 | 3 | 3 |
| Mounting thread M | M10 | M10 | M10 | M10 | M10 |
| Overall length Ltot | 30 | 30 | 30 | 28 | 30 |
| Through-coolant | yes | yes | yes | yes | yes |
| suitable indexable insert | TOMT060508 | AP.. 1335.. | AP.. 1003 | LO.U0904.. | XNEX 040308 |
| Cutting edge ⌀ DC | 20 | 20 | 20 | 20 | 20 |
| Setting angle κ | 90 | 90 | 90 | 90 | 90 |