{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEV 20/2L mm
Article no.: 226400 20/2L
Article code:
- Setting angle κ: 90
- Milling application: Plunging; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 6 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 150 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| ⌀ D3 | 15 mm | |
| Circular interpolation milling ⌀ Dmin | 35 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Ramping angle αmax | 0.8 degrees | |
| Ramping length L for αmax | 14.25 mm | |
| suitable indexable insert | TOMT060508 | |
| Insert screw | 229723 1 (10IP; 2.0 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226400 20/2L | |
| EAN / GTIN | 4960664914197 | |
| Manufacturer number | THN08493 |
Description
Version:
High-performance milling cutter with newly developed triangular indexable insert for corner and slot milling and ramping with lower cutting forces and increased stability.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable milling cutter 90° MEV 20/2L mm |
|||
| Number of cutting edges Z | 2 | 2 | 2 |
| Overhang L1 | 40 | 30 | 50 |
| Milling application | Plunging ;Ramping ;End milling | End milling ;Circular milling ;Ramping | Circular milling ;Ramping ;End milling |
| suitable indexable insert | TOMT060508 | AP.. 1335.. | AP.. 1003.. |
| Shank type | Plain shank | Plain shank | Weldon shank |
| Cutting edge ⌀ DC | 20 | 20 | 20 |
| Setting angle κ | 90 | 90 | 90 |