{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MFWN, with bore, ⌀ D / number of teeth Z: 63/4mm
Article no.: 225615 63/4
Article code:
- Setting angle κ: 90
- Milling application: Plunging; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 8 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | WNMU 0806.. | |
| Insert screw | 229700 (T15; 4.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 225615 63/4 | |
| EAN / GTIN | 4960664647675 | |
| Manufacturer number | THN04700 |
Description
Version:
Milling cutter with double-sided indexable inserts.
The combination of approach angle, chip chamber design as well as the geometries and cutting angles of the indexable inserts ensure outstanding metal removal rates, chip clearance, working life, and low cutting forces, and hence high cost-effectiveness.
The combination of approach angle, chip chamber design as well as the geometries and cutting angles of the indexable inserts ensure outstanding metal removal rates, chip clearance, working life, and low cutting forces, and hence high cost-effectiveness.