{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 32/3 mm
Article no.: 222060 32/3
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Machining strategy: HPC
Product details
Technical Data
| Shank type | with threaded shank | |
| Milling application | Circular milling; Plunging; Ramping | |
| Machining strategy | HPC | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222060 32/3 | |
| EAN / GTIN | 4960664712489 | |
| Manufacturer number | THN07553 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
High feed rate milling cutter MFH Harrier 32/3 mm |
||||
| Milling application | Circular milling; Plunging; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging |
| Overall length Ltot | 47 mm | 47 mm | ||
| Through-coolant | yes | yes | ||
| suitable indexable insert | XDM.090416 | XOMU094812 | ||
| Machining strategy | HPC | HPC | HPC | HPC |
| ⌀ D3 | 20 mm | 22 mm | ||
| Ramping angle αmax | 1.97 degrees | 1.76 degrees | ||