{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | TwinCut | |
Cutting edge ⌀ DC | 80 mm | |
Number of cutting edges Z | 8 | |
Shank type | with bore | |
Setting angle κ | 45 degrees | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum external ⌀ Dmax for ON.U inserts | 91.8 mm | |
maximum external ⌀ Dmax for SN.U inserts | 95.2 mm | |
Overall length Ltot for SN.U inserts | 50 mm | |
Overall length Ltot for ON.U inserts | 48.3 mm | |
Mounting bore ⌀ | 27 mm | |
suitable indexable insert | SN.U; ON.U | |
Pack of insert screws | 219898 (15IP; 3.8 Nm) | |
Shim | 219897 | |
Clamp screw for shim | 219899 | |
Type of product | Face mill |
Article number | 213420 80/8 | |
EAN / GTIN | 4045197716842 | |
Manufacturer number | 213420 80/8 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() TwinCut indexable face mill 45° close pitch 80/8 mm |
|||
Number of cutting edges Z | 8 | 8 | 8 |
Mounting bore ⌀ | 27 | 27 | 27 |
Through-coolant | yes | yes | yes |
suitable indexable insert | SN.U ;ON.U | SE.. 1204.. | SE.T1305 ;XEEW1305 |
Shank type | with bore | with bore | with bore |
Cutting edge ⌀ DC | 80 | 80 | 80 |
Type of product | Face mill | Face mill | Face mill |