{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Power Q | |
Cutting edge ⌀ DC | 63 mm | |
Number of cutting edges Z | 6 | |
Shank type | with bore | |
Milling application | Circular milling; Ramping; Plunging | |
Through-coolant | yes | |
Machining strategy | HPC | |
Tool exchange | PowerCard | |
⌀ D3 | 53 mm | |
Overall length Ltot | 50 mm | |
Mounting bore ⌀ | 27 mm | |
Circular interpolation milling ⌀ Dmin | 116 mm | |
Circular interpolation milling ⌀ Dmax | 124 mm | |
Circular interpolation milling ap | 1.2 mm | |
Ramping angle αmax | 0.68 degrees | |
Ramping length L for αmax | 50.55 mm | |
suitable indexable insert | XOMU094812 | |
Setting angle κ | 15 degrees | |
Fz Helix | 0.8 | |
Type of product | Copy mill |
Article number | 213006 63/6 | |
EAN / GTIN | 4062406266769 | |
Manufacturer number | 213006 63/6 |
This article |
Recommendations |
|||
---|---|---|---|---|
GARANT Power Q Double high feed rate indexable milling cutter, with bore, ⌀ D / number of effective cutting edges Z: 63/6mm |
||||
Number of cutting edges Z | 6 | 5 | 5 | 5 |
Setting angle κ | 15 degrees | 12 degrees | 11 degrees | 16 degrees |
Milling application | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging | Plunging; Ramping; Plunging |
Overall length Ltot | 50 mm | 50 mm | 50 mm | 50 mm |
suitable indexable insert | XOMU094812 | XD.. 120408 | XDM.120516 | XOMU146715 |
Ramping angle αmax | 0.68 degrees | 0.41 degrees | 1.06 degrees | 1.04 degrees |
Ramping length L for αmax | 50.55 mm | 41.5 mm | 43.34 mm | 44.07 mm |