{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC reamer Configurable 8,5 mm
Article no.: 162951 8,5
Article code:
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 8.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| ⌀ range | 8.060 mm - 8.500 mm | |
| Flute length Lc | 33 mm | |
| Overhang L1 | 80 mm | |
| Overall length L | 117 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 8 mm | |
| Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Shank tolerance | h6 | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162951 8,5 | |
| EAN / GTIN | 4045197366153 | |
| Manufacturer number | 162951 8,5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
NC reamer Configurable 8,5 mm |
||||
| Number of cutting edges Z | 6 | 6 | 6 | 6 |
| Coating | uncoated | uncoated | uncoated | uncoated |
| Nominal ⌀ DC | 8.5 | 8.5 | 8.5 | 8.5 |
| Standard | Manufacturer’s standard | Manufacturer’s standard | DIN 212 B | DIN 208 B |
| Flute length Lc | 33 | 33 | 33 | 36 |
| Application for type of drilling | for through holes | for through holes | for through holes | for through hole |
| Reaming oversize in diameter | 0.1 ;0.2 | 0.1 ;0.2 | 0.1 ;0.2 | 0.1 ;0.2 |