{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC reamer Configurable, uncoated, Nominal ⌀ DC: 4mm
Article no.: 162951 4
Article code:
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 4 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| ⌀ range | 3.760 mm - 4.050 mm | |
| Flute length Lc | 19 mm | |
| Overhang L1 | 46 mm | |
| Overall length L | 75 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in steel < 750 N/mm2 | 0.15 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm | |
| Shank tolerance | h6 | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X; ZC; Z; ZA | |
| Configurable qualities | 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162951 4 | |
| EAN / GTIN | 4045197366061 | |
| Manufacturer number | 162951 4 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
NC reamer Configurable, uncoated, Nominal ⌀ DC: 4mm |
|||||
| Number of cutting edges Z | 6 | 6 | 6 | 6 | 6 |
| Colour ring | without | green | without | without | without |
| Nominal ⌀ DC | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard | DIN 212 B | DIN 212 B | DIN 208 B |
| Tool material | HSS E | HSS E | HSS E | HSS E | HSS E |
| Application for type of drilling | for through holes | for through holes | for through holes | for through holes | for through hole |
| Reaming oversize in diameter | 0.1 mm | 0.1 mm | 0.1 mm | 0.1 mm | 0.1 mm |