{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer set No. 160150 in a box H7 6
Article no.: 160175 6
Article code:
Click to enlarge image
Click to enlarge image
Taper lead form
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
- Hole tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through holes
Product details
Technical Data
| Number of reamers | 6 | |
| Hole tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through holes | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160175 6 | |
| EAN / GTIN | 4045197994806 | |
| Manufacturer number | 160175 6 |
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Content:
1 pc. each hand reamer: Size 3; 4; 5; 6; 8; 10
Supplied with:
6-piece hand reamer set in a box.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
Hand reamer set No. 160150 in a box H7 6 |
||
| Hole tolerance | H7 | H7 |
| Standard | DIN 206 B | Manufacturer’s standard |
| Tool material | HSS | HSS E |
| Helix angle | 7-8 | |
| Application for type of drilling | for through holes | for through holes |
| Number of reamers | 6 | 6 |
| Type of product | Phillips bit | Phillips bit |