{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub drill HSS-E, TiAlN, ⌀ DC h8: 7,5mm
Article no.: 113265 7,5
Article code:
- Tool material: HSS E
- Standard: DIN 1897
- Tolerance nominal ⌀: h8
- Point angle: 118
- Shank: Plain shank
Offers
Product details
Technical Data
| Nominal ⌀ DC | 7.5 mm | |
| Coating | TiAlN | |
| Tool material | HSS E | |
| Standard | DIN 1897 | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 22.8 mm | |
| Flute length Lc | 34 mm | |
| Overall length L | 74 mm | |
| Shank ⌀ Ds | 7.5 mm | |
| Feed f in stainless steel < 900 N/mm2 | 0.05 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 113265 7,5 | |
| EAN / GTIN | 4062406235123 | |
| Manufacturer number | 113265 7,5 |
Application Table
N
75
N
65
N
60
P
50
P
40
P
35
P
16
M
17
M
13
S
8
K
40
N
50
Description
Version:
High concentricity and special chip flutes ensure precise bores.
With point geometry shape C from size 2.4 mm.
With point geometry shape C from size 2.4 mm.
Advantage:
Ideal for drilling shallow holes (approx. 2 - 4×D) on NC machines and automatic machines.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Stub drill HSS-E, TiAlN, ⌀ DC h8: 7,5mm |
|||||||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | TiAlN | uncoated | TiAlN | uncoated | TiN | TiAlN | TiAlN | uncoated | uncoated |
| Standard | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 |
| Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank | Plain shank |
| Point angle | 118 degrees | 135 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 118 degrees |
| Shank ⌀ Ds | 7.5 mm | 7.5 mm | 7.5 mm | 7.5 mm | 7.5 mm | 7.5 mm | 7.5 mm | 7.5 mm | 7.5 mm |
| recommended maximum drilling depth L2 | 22.8 mm | 22.8 mm | 22.8 mm | 22.8 mm | 22.8 mm | 22.8 mm | 22.8 mm | 22.8 mm | 22.8 mm |