{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub drill HSS-E, TiAlN, ⌀ DC h8: 11mm
Article no.: 113265 11
Article code:
- Tool material: HSS E
- Standard: DIN 1897
- Tolerance nominal ⌀: h8
- Point angle: 118
- Shank: Plain shank
Product details
Technical Data
| Nominal ⌀ DC | 11 mm | |
| Coating | TiAlN | |
| Tool material | HSS E | |
| Standard | DIN 1897 | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 30.5 mm | |
| Flute length Lc | 47 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 11 mm | |
| Feed f in stainless steel < 900 N/mm2 | 0.09 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 113265 11 | |
| EAN / GTIN | 4062406235741 | |
| Manufacturer number | 113265 11 |
Application Table
N
75
N
65
N
60
P
50
P
40
P
35
P
16
M
17
M
13
S
8
K
40
N
50
Description
Version:
High concentricity and special chip flutes ensure precise bores.
With point geometry shape C from size 2.4 mm.
With point geometry shape C from size 2.4 mm.
Advantage:
Ideal for drilling shallow holes (approx. 2 - 4×D) on NC machines and automatic machines.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Stub drill HSS-E, TiAlN, ⌀ DC h8: 11mm |
|||||||||
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Through-coolant | no | no | no | no | no | no | no | no | no |
| Standard | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 | DIN 1897 |
| Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank | Plain shank |
| Point angle | 118 degrees | 135 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 118 degrees |
| Shank ⌀ Ds | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm | 11 mm |
| recommended maximum drilling depth L2 | 30.5 mm | 30.5 mm | 30.5 mm | 30.5 mm | 30.5 mm | 30.5 mm | 30.5 mm | 30.5 mm | 30.5 mm |