{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
Avstickningsverktygshållare 12/3 mm
Art-nr: 273760 12/3
Artikelnummer:
Produktdetaljer
Tekniska data
| Spårbredd w | 3 mm | |
| Användning | Höger | |
| Invändig | nej | |
| Maximal ⌀ | 40 mm | |
| Stickdjup tmax | 20 mm | |
| Funktionsbredd L4 | 12 mm | |
| Huvudängd L1 | 35 mm | |
| Skaftbredd b | 12 mm | |
| totallängd L | 150 mm | |
| Skruvar | 279815 4 (TX15; 3,5 Nm) | |
| axiell spårstickning kan göras | Ja | |
| Produktslag | Skärhållare |
Identifieringsnummer och klassificeringar
| Artikelnummer | 273760 12/3 | |
| EAN/GTIN | 4045197485151 | |
| Tillverkarens nummer | 273760 12/3 |
Benämning
Version:
Made of high-tensile tool steel (> 1300 N/mm2). In conjunction with the convex insert clamping, the system achieves very high resistance to axial and radial cutting forces and thereby significantly increases the surface quality and productivity.
6.5×w
Note:
Maximum ⌀ = limited workpiece ⌀ due to the tool type.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.