{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Sticksvarvhållare höger 20/3 mm GARANT
Article no.: 273760 20/3
Artikkelkode:
- Invändig: nej
Produktinformasjon
Technical Data
| Spårbredd w | 3 mm | |
| Användning | Höger | |
| Invändig | nej | |
| Maximal ⌀ | 60 mm | |
| Stickdjup tmax | 30 mm | |
| Funktionsbredd L4 | 21,5 mm | |
| Huvudängd L1 | 46 mm | |
| Skaftbredd b | 20 mm | |
| totallängd L | 150 mm | |
| Skruvar | 279815 6 (TX25; 6 Nm) | |
| axiell spårstickning kan göras | yes | |
| Produktslag | Skärhållare |
Identification numbers & Classifications
| Artikkelkode | 273760 20/3 | |
| EAN / GTIN | 4045197485175 | |
| Manufacturer number | 273760 20/3 |
Beskrivelse
Version:
Made of high-tensile tool steel (> 1300 N/mm2). In conjunction with the convex insert clamping, the system achieves very high resistance to axial and radial cutting forces and thereby significantly increases the surface quality and productivity.
10×w
Note:
Maximum ⌀ = limited workpiece ⌀ due to the tool type.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.