{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill vändskärsborr kombiskaft 35 mm
Article no.: 234010 35
Artikkelkode:
- Drill depth for indexable insert drill up to: 4×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Produktinformasjon
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 35 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 140 mm | |
| for inch ⌀ | 1 3/8 in | |
| Overhang LA | 166 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 110509 | |
| Pack of insert screws | 239700 15IP (2.8 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Artikkelkode | 234010 35 | |
| EAN / GTIN | 4045197740687 | |
| Manufacturer number | 234010 35 |
Beskrivelse
Version:
The helical coolant ducts ensure very high stability, since they do not weaken the core of the drill.
Bore tolerance: −0.1 / +0.35 mm
Bore tolerance: −0.1 / +0.35 mm
Description:
For maximum performance and dimensional accuracy. Even for very difficult drilling situations up to 5×D.
Suitable for:
Inserts SOGX 110509.
Note:
Other intermediate sizes in 1/10 increments available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Power Drill vändskärsborr kombiskaft 35 mm
on request
På lager
10 styck i lager
NOK 8 375,59
plus VAT at the current rate
Prices plus delivery costs
|
||
| Through-coolant | yes | yes |
| ISO code indexable insert | SOGX 110509 | SOMT110408 / XOMT110406 |
| Nominal ⌀ D | 35 | 15 |
| Shank ⌀ Ds | 40 | 32 |
| Shank length Ls | 68 | 60 |
| Machining strategy | HPC | HPC |
| Reach L1 | 140 | 143 |