{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
HiPer-Drill basiselement 26 mm
Article no.: 231605 26
Artikkelkode:
- Uitvoering: 3×D
- Schacht: ISO 9766
- Boortoepassing: beperkt dwarsboren; beperkt pakketboren; beperkt schuine uittrede; beperkt schuin aanboren
- Aantal snijkanten Z: 2
- Inwendige koeling: ja
Produktinformasjon
Technical Data
| Serie | HiPer-Drill | |
| Uitvoering | 3×D | |
| Schacht | ISO 9766 | |
| Boortoepassing | beperkt dwarsboren; beperkt pakketboren; beperkt schuine uittrede; beperkt schuin aanboren | |
| Aantal snijkanten Z | 2 | |
| Inwendige koeling | ja | |
| ⌀-bereik Dc | 26 mm - 26,99 mm | |
| Nuttige lengte L1 | 81 mm | |
| Schacht-⌀ Ds | 32 mm | |
| Schachtlengte Ls | 60 mm | |
| Spanschroef | 231999 10IP (3,3 Nm) | |
| Totale lengte L | 180 mm | |
| Producttype | Wisselplaatboor |
Identification numbers & Classifications
| Artikkelkode | 231605 26 | |
| EAN / GTIN | 4045197602879 | |
| Manufacturer number | 231605 26 |
Beskrivelse
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.