{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Högmatningsfräs 7792VX med hål 125/10 mm
Article no.: 221908 125/10
Artikkelkode:
- Fräsanvändning: Cirkulärfräsning; Ramping; Ramping
- Invändig: ja
- Bearbetningsstrategi: HPC
Produktinformasjon
Technical Data
| Skär-⌀ DC | 125 mm | |
| Antal skär Z | 10 | |
| Skaftutförande | med hål | |
| Fräsanvändning | Cirkulärfräsning; Ramping; Ramping | |
| Invändig | ja | |
| Bearbetningsstrategi | HPC | |
| ⌀ D3 | 98 mm | |
| maximalt sågdjup ap max | 3,5 mm | |
| totallängd Ltot | 63 mm | |
| Fästhåls⌀ | 40 mm | |
| spiralfräsning ⌀ Dmin | 223 mm | |
| spiralfräsning ⌀ Dmax | 248 mm | |
| Rampningsvinkel αmax | 0,21 grad | |
| Rampningslängd L för αmax | 97,3 mm | |
| Vändskärsstorlek | 16 | |
| Passande vändskär | XE.. 1605 | |
| Vändskärsskruv | 229920 (TP20; 7,6Nm) | |
| Inställningsvinkel κ | 16 grad | |
| Fz Helix | 0,7 | |
| Produktslag | Kopierfräs |
Identification numbers & Classifications
| Artikkelkode | 221908 125/10 | |
| EAN / GTIN | 4059782504271 | |
| Manufacturer number | 5661028 |
Beskrivelse
Description:
The unique design of the indexable inserts together with their approach angle in the milling body greatly reduces the radial forces and diverts them into the axial direction. Particularly thick indexable inserts with 4 cutting edges for the heaviest duties and high cost-effectiveness. The tool has particular advantages for face milling and milling deep pockets. With its ground wiper chamfer it is equally well suited also to plunge milling and finish milling operations.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High feed rate milling cutter 7792VX 125/10 mm
on request
Finns inom 2-3 veckor
0 styck i lager
US $ 1,116.69
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
8 styck i lager
US $ 554.58
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
26 styck i lager
US $ 871.13
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 40 | 40 | 40 |
| Through-coolant | ja | yes | yes |
| Shank type | med hål | with bore | with bore |
| Cutting edge ⌀ DC | 125 | 125 | 125 |
| ⌀ D3 | 98 | 113 | 113 |
| Circular interpolation milling ⌀ Dmin | 223 | 238 | 238 |
| Fz Helix | 0,7 | 0.7 | 0.7 |