{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
KUB Pentron® indexable drill Plain shank 31,5 mm
Artikelnummer: 236615 31,5
Klantartikelnummer:
- Drill depth for indexable insert drill up to: 3×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Productdetails
Technische gegevens
| Series | KUB Pentron® | |
| Nominal ⌀ D | 31.5 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 96 mm | |
| Overhang LA | 120 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| ISO code indexable insert | SOGX 100408 32-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identificatienummers en classificaties
| Artikelnummer | 236615 31,5 | |
| EAN/GTIN | 4047109277168 | |
| Nummer fabrikant | U43 33150 |
Omschrijving
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.2
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Downloads en documenten
Vergelijk met soortgelijke producten
Dit artikel |
Aanbevelingen |
|
|---|---|---|
KUB Pentron® indexable drill Plain shank 31,5 mm
op aanvraag
Leverbaar in 1-3 werkdagen
0 stuks direct leverbaar
£486.86
Excl. BTW
Excl. verzendkosten
|
||
| Borrdjup för vändskärsborr upp till | 3×D | 3×D |
| Borranvändning | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling | kräver centreringsborrning ;konvex krävs ;kräver kryssborrning ;kräver paketborrning ;kräver snedställd utgång ;kräver paketborrning |
| Nominell⌀ D | 31.5 | 31,5 |
| Skaftlängd Ls | 68 | 68 |
| Skruvsats förvändskär | 239652 15IP1 (2.8 Nm) | 239700 10IP (2,8 Nm) |
| Bearbetningsstrategi | HPC | HPC |
| Utkragningslängd LA | 120 | 120 |