{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque screwdriver without scale 300 cNm
Article no.: 659934 300
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Remove the cover flap in the end of the handle for torque setting.
Click to enlarge image
Remove the cover flap in the end of the handle for torque setting.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±6
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| Manufacturer's designation | 7400 pre-set, 105 mm | |
| maximum torque | 300 cNm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 155 mm | |
| set torque | 1.2 Nm | |
| 1 turn (360°) corresponds to | 20 cNm | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Bit holder 1/4 inch | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | without setting scale (requires torque analyser) | |
| Feedback | triggering | |
| Measurement process | Torque | |
| Adjustable trigger value | preset | |
| Standard | DIN EN ISO 6789 | |
| Weight | 180 g | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659934 300 | |
| EAN / GTIN | 4013288102928 | |
| Manufacturer number | 05074716001 |
Description
Version:
Kraftform handle for easy transmission of the required torque. With Rapidaptor quick-change holder for 1/4 inch bits with C 6.3 and E 6.3 shank.
The torque can be set using a torque analyser (No. 654300 − 654460) and a 7AF hexagon screwdriver (10AF for size 600) . The torque screwdrivers are factory-set to the most frequently used torque setting.
The torque can be set using a torque analyser (No. 654300 − 654460) and a 7AF hexagon screwdriver (10AF for size 600) . The torque screwdrivers are factory-set to the most frequently used torque setting.
Function:
When the set torque is reached the screwdriver triggers, with clearly audible and perceptible signals. The triggering torque is unrestricted.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Rapidaptor free-running coupling shank available from our eShop (No. 675035 size 6.3F).
Rapidaptor free-running coupling shank available from our eShop (No. 675035 size 6.3F).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
Torque screwdriver without scale 300 cNm |
||
| Reversible reading | cNm ;Nm | |
| Direction of tightening | Right-hand tightening | For right- and left-hand tightening |
| Data can be recorded | no | no |
| Torque measuring accuracy | ±6 | ±6 |
| Measurement process | Torque | Torque |
| Measurement technology | mechanical | mechanical |
| Connection format | Bit holder 1/4 inch | Bit holder 1/4 inch |