{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 32 mm | |
Number of cutting edges Z | 3 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 15.7 mm | |
Overhang L1 | 40 mm | |
Overall length Ltot | 100 mm | |
Shank ⌀ Ds h6 | 32 mm | |
⌀ D3 | 25 mm | |
Circular interpolation milling ⌀ Dmin | 57 mm | |
Circular interpolation milling ⌀ Dmax | 62 mm | |
Ramping angle αmax | 0.61 degrees | |
Ramping length L for αmax | 23.6 mm | |
suitable indexable insert | BDMT 170408 | |
Insert screw | 229709 (T15; 3.5 Nm) | |
Type of product | End / face mill |
Article number | 227505 32/3 | |
EAN / GTIN | 4960664406661 | |
Manufacturer number | THN63256 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() Indexable milling cutter 90° MEC17 32/3 mm |
|||||
Overhang L1 | 40 mm | 41 mm | 50 mm | 50 mm | 30 mm |
Overall length Ltot | 100 mm | 110 mm | 110 mm | 110 mm | 105 mm |
suitable indexable insert | BDMT 170408 | SOMT 09T304 | AP.. 1805.. | AP.. 16.. | LO.U0904.. |
Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Shank ⌀ Ds h6 | 32 mm | 25 mm | 32 mm | 32 mm | 32 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |