{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Number of cutting edges Z | 3 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 10 mm | |
Overhang L1 | 30 mm | |
Overall length Ltot | 110 mm | |
Shank ⌀ Ds h6 | 20 mm | |
⌀ D3 | 14 mm | |
Circular interpolation milling ⌀ Dmin | 34 mm | |
Circular interpolation milling ⌀ Dmax | 38 mm | |
Ramping angle αmax | 0.88 degrees | |
Ramping length L for αmax | 13 mm | |
suitable indexable insert | BD.. 11T3 | |
Insert screw | 229708 (T8; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 227300 20/3 | |
EAN / GTIN | 4960664396078 | |
Manufacturer number | THN03167 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Indexable milling cutter 90° MEC11T, Plain shank, ⌀ D / number of teeth Z: 20/3mm |
|||||
Number of cutting edges Z | 3 | 3 | 2 | 3 | 3 |
Through-coolant | yes | yes | yes | yes | yes |
suitable indexable insert | BD.. 11T3 | AP.. 1335.. | LO.U0904.. | LO.U0904.. | XNEX 040308 |
Shank type | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Shank ⌀ Ds h6 | 20 mm | 16 mm | 20 mm | 20 mm | 20 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |