{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH micro 16/4 mm
Article no.: 221943 16/4
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with thread | |
| Milling application | Circular milling; Ramping; Plunging | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| ⌀ D1 h6 | 8.5 mm | |
| ⌀ D3 | 12 mm | |
| maximum cutting depth ap max | 0.5 mm | |
| Overall length Ltot | 22 mm | |
| Mounting thread M | M8 | |
| Circular interpolation milling ⌀ Dmin | 28 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Ramping angle αmax | 1.03 degrees | |
| Ramping length L for αmax | 11.1 mm | |
| suitable indexable insert | LPGT 0102.. | |
| Insert screw | 229722 (6IP; 0.6Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221943 16/4 | |
| EAN / GTIN | 4960664806737 | |
| Manufacturer number | THN08325 |
Description
Version:
For extremely cost-effective machining due to high feed rates. Vibration is minimised by cutting force reduction.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH micro 16/4 mm |
||
| Number of cutting edges Z | 4 | 4 |
| Overall length Ltot | 22 | 20 |
| Through-coolant | yes | yes |
| Shank type | with thread | with threaded shank |
| Cutting edge ⌀ DC | 16 | 16 |
| Circular interpolation milling ⌀ Dmin | 28 | 27 |
| Ramping length L for αmax | 11.1 | 9.72 |