{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET® countersink 45°, Weldon shank, for DIN countersunk screws: M14
Article no.: 216600 M14
Article code:
- Through-coolant: no
- Countersink angle: 90
Product details
Technical Data
| Countersink ⌀ D | 11 mm | |
| for DIN countersunk screws | M14 | |
| Shank type | Weldon shank | |
| Through-coolant | no | |
| Number of cutting edges Z | 1 | |
| Number of indexable inserts | 2 | |
| maximum chamfering ⌀ Dmax | 26 mm | |
| Overall length Ltot | 100 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| suitable indexable insert | TO.. 0902 | |
| Indexable insert No. 216700; No. 216740; No. 216770 | 14-660 | |
| Pack of insert screws | 239653 8IP7 (1.3 Nm) | |
| Countersink angle | 90 degrees | |
| Type of product | Counterbores, countersinks |
Identification numbers & Classifications
| Article number | 216600 M14 | |
| EAN / GTIN | 4047109013018 | |
| Manufacturer number | F10 00071 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
KOMET® countersink 45°, Weldon shank, for DIN countersunk screws: M14 |
||
| Number of cutting edges Z | 1 | 1 |
| Overall length Ltot | 100 mm | 86 mm |
| suitable indexable insert | TO.. 0902 | SP.T09T3.. |
| Shank type | Weldon shank | Weldon shank |
| Pack of insert screws | 239653 8IP7 (1.3 Nm) | 219841 (15IP; 3.0 Nm) |
| Shank ⌀ Ds h6 | 16 mm | 16 mm |
| Type of product | Counterbores, countersinks | Counterbores, countersinks |