{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| ⌀ D3 | 47 mm | |
| Circular interpolation milling ⌀ Dmin | 97 mm | |
| Circular interpolation milling ⌀ Dmax | 98 mm | |
| Ramping angle αmax | 0.32 degrees | |
| Ramping length L for αmax | 44.85 mm | |
| suitable indexable insert | AP.. 1003.. | |
| Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215850 50/6 | |
| EAN / GTIN | 4045197221759 | |
| Manufacturer number | 215850 50/6 |
Description
Exécution:
Avec alésage pour vissage.
Utilisation:
Utilisation universelle dans tous les matériaux.
- Détourage et rainurage, copiage vers l’intérieur, interpolation hélicoïdale, fraisage-perçage par interpolation.
Remarque(s):
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Shoulder mill 90° 50/6 mm |
on request
Delivery in 3 - 4 working days
0 pieces in stock
CHF 613.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
1 pieces in stock
CHF 394.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
0 pieces in stock
CHF 617.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Application de fraisage | Circular milling ;Ramping ;End milling | Dressage | Dressage ;Fraisage circulaire ;Ramping | Dressage |
| Longueur totale Ltot | 40 | 40 | 40 | 40 |
| Arrosage interne | yes | oui | oui | oui |
| Plaquette adaptée | AP.. 1003.. | SO.. 0836.. | AP.. 1335.. | LO.. 130708 |
| Type de queue | with bore | avec alésage | avec alésage | avec alésage |
| ⌀ dents DC | 50 | 50 | 50 | 50 |
| Type de produit | End / face mill | Fraise à dresser | Fraise à dresser | Fraise à dresser |