{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | FeedKing | |
Cutting edge ⌀ DC | 50 mm | |
Number of cutting edges Z | 5 | |
Shank type | with bore | |
Milling application | Circular milling; Ramping; Plunging | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Machining strategy | HPC | |
Tool exchange | PowerCard | |
⌀ D3 | 34 mm | |
maximum cutting depth ap max | 1.15 mm | |
Overall length Ltot | 40 mm | |
Mounting bore ⌀ | 22 mm | |
Circular interpolation milling ⌀ Dmin | 84 mm | |
Circular interpolation milling ⌀ Dmax | 98 mm | |
Circular interpolation milling ap | 1.15 mm | |
Ramping angle αmax | 0.51 degrees | |
Ramping length L for αmax | 33.5 mm | |
suitable indexable insert | XD.. 09T308 | |
Pack of insert screws | 219933 (15IP; 3.8 Nm) | |
Setting angle κ | 9 degrees | |
Fz Helix | 0.7 | |
Type of product | Copy mill |
Article number | 212910 50/5 | |
EAN / GTIN | 4045197321008 | |
Manufacturer number | 212910 50/5 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() FeedKing high feed rate indexable face mill 50/5 mm |
|||
Number of cutting edges Z | 5 | 5 | 5 |
Overall length Ltot | 40 mm | 40 mm | 40 mm |
Through-coolant | yes | yes | yes |
suitable indexable insert | XD.. 09T308 | POMX 0704.. | XDM.090416 |
Shank type | with bore | with bore | with bore |
Cutting edge ⌀ DC | 50 mm | 50 mm | 50 mm |
⌀ D3 | 34 mm | 35.6 mm | 38 mm |