{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 208024 45,5X10
Solid carbide Woodruff keyseating cutter 45,5X10 mm
Article no.: 208025 45,5X10
Article code:
- Tool material: Solid carbide
- Standard: DIN 850 D/F
- Milling profile: staggered teeth
- Type: NF
- Tolerance nominal ⌀: e8
Product details
Technical Data
| Cutting edge ⌀ DC | 45.5 mm | |
| Flute length Lc | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 850 D/F | |
| Milling profile | staggered teeth | |
| Type | NF | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 10 | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| for Woodruff keyways to DIN 6888 | 10.0×16.0 mm | |
| Recess ⌀ D1 | 11.8 mm | |
| Overall length L | 71 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | green | |
| Type of product | Slot milling cutter |
Identification numbers & Classifications
| Article number | 208025 45,5X10 | |
| Manufacturer number | 208025 45,5X10 |
Application Table
P
70
P
67
P
65
P
63
P
60
M
40
Description
Version:
Peripheral cutting, alternate set teeth (staggered). The sides of the teeth are ground to give clearance and thus cannot jam in the component.
With chip separators– type NF.
Note:
For milling Woodruff keyways to DIN 6888 or for milling small slots.
Slot milled from solid: fz for ap = 0.25×D.
Slot milled from solid: fz for ap = 0.25×D.