{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master INOX M SlotMachine solid carbide roughing end mill HPC 5 mm
Article no.: 205448 5
Article code:
- Tool material: Solid carbide
- Norm: DIN 6527
- Milling profile: NR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 4
Product details
Technical Data
| Serie | Master INOX | |
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Norm | DIN 6527 | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 4 | |
| Helix angle | 40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 9 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.15 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in stainless steel > 900 N/mm2 | 0.015 mm | |
| Feed fz for side milling in INOX > 900 N/mm2 | 0.02 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205448 5 | |
| EAN / GTIN | 4062406275488 | |
| Manufacturer number | 205448 5 |
Application Table
P
150
P
140
P
120
P
110
P
100
M
90
M
80
Description
Version:
With a new-type knuckle form profile, optimised for higher feed rates in INOX. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate. Number of teeth tailored to performance and process reliability.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Application:
For roughing machining, particularly suitable for full-slot machining.
Recommendation:
To ensure reliable working, particularly for full slot milling, use arbors with 4 cooling channel bores.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
GARANT Master INOX M SlotMachine solid carbide roughing end mill HPC 5 mm |
||||||
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Milling profile | NR | HR | HR | HR | HR | NR |
| Flute length Lc | 9 | 10 | 13 | 9 | 13 | 13 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 40 | 20 | 30 | 45 | 45 | 40 |
| Tolerance nominal ⌀ | d11 | d11 | d11 | d11 | d11 | d11 |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 | 6 |