{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill HPC 8 mm
Article no.: 203170 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: f8
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | ZOX | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 6 | |
| Helix angle | 48 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 19 mm | |
| Overhang length L1 incl. recess | 26 mm | |
| Recess ⌀ D1 | 7.4 mm | |
| Overall length L | 64 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in short-chipping aluminium | 0.04 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203170 8 | |
| EAN / GTIN | 4045197271938 | |
| Manufacturer number | 203170 8 |
Application Table
N
460
N
400
N
210
N
180
Description
Version:
With strong core, special chip-breaker recesses and large polished flutes.
Application:
For milling on the most demanding component surfaces.
Suitable exclusively for profile milling.
Suitable exclusively for profile milling.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide end mill HPC 8 mm |
||||||
| Coating | ZOX | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | DIN 6527 |
| Cutting edge ⌀ DC | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
| Flute length Lc | 19 mm | 19 mm | 19 mm | 19 mm | 19 mm | 19 mm |
| Tolerance nominal ⌀ | f8 | e8 | 0 / -0.02 | h10 | e8 | 0 / -0.02 |
| Shank ⌀ Ds | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |