{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC reamer Configurable 12,5 mm
Article no.: 162951 12,5
Article code:
- Tool material: HSS E
- Norm: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 12.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Norm | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| ⌀ range | 12.060 mm - 12.600 mm | |
| Flute length Lc | 44 mm | |
| Overhang L1 | 110 mm | |
| Overall length L | 151 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | |
| Reaming oversize in diameter | 0.2 mm - 0.3 mm | |
| Shank tolerance | h6 | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162951 12,5 | |
| EAN / GTIN | 4045197366238 | |
| Manufacturer number | 162951 12,5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
NC reamer Configurable 12,5 mm |
|||
| Number of cutting edges Z | 6 | 6 | 6 |
| Coating | uncoated | uncoated | uncoated |
| Nominal ⌀ DC | 12.5 | 12.5 | 12.5 |
| Shank | DIN 1835 A to h6 | Morse taper | DIN 1835 A to h6 |
| Flute length Lc | 44 | 44 | 44 |
| Application for type of drilling | for through holes | for through hole | for through holes |
| Feed f in steel < 750 N/mm2 | 0.25 | 0.15 | 0.25 |